St12 1.0330 - DIN 1623-1

Grade	St12
Germany W-Nr.	1.0330
Corresponding Standard	DIN 1623-1-1983 Cold rolled strip and sheet – Technical delivery conditions – General structural steels
Classification	Carbon Steel
Density	7.85 g/cm³

St12 Chemical Element Composition Content (%)

Component	C	N
Minimum Value	-	-
Maximum Value	0.1	0.007

St12 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Thin plate, Coil; Cold rolled	270~410	≤280	≥28	HRB ≤65

1 Approximate Comparison Table High-Quality Carbon Structural Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	SAE	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
08 08F	SPCC	1008 1010	Cr01 CR22	FeP01 St12	C F12 FeP01	DC01 FeP01	1.0330	08kp 08ps	1142	CR4 FeP01

2 Approximate Comparison Table High-Quality Carbon Structural Steel

St12 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!