St14 1.0338 - DIN 1623-1-1983

Grade	St14
Germany W-Nr.	1.0338
Corresponding Standard	DIN 1623-1-1983 Cold rolled strip and sheet – Technical delivery conditions – General structural steels
Classification	Carbon Steel

St14 Chemical Element Composition Content (%)

Component	C	Al
Minimum Value	-	0.02
Maximum Value	0.08	-

• Replaced by the DIN EN 10130 grade Fe P 04
• Grade St14 steel shall be supplied in the specially killed (RR) condition
•The nitrogen shall be fixed. Therefore, the steel shall contain at least 0.02 % of metallic aluminium. The use of other elements for fixing the nitrogen shall be agreed with the purchaser.

St14 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Thin plate, Coil; Cold rolled	270~350	≤210	≥33	HRB ≤50

Approximate Comparison Table

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
SPCE	A619 DDS	Cr04 CR24	RRSt14 St14	1.0338	ES	DC04 FeP04①	1.0338	05kp 08kp 08YU	1147	1CR 1CS 1HR 1HS CR1

St14 Corresponding Standards(Same grade name, different standards)

1	DIN 1623-1-1983
	St14 1.0338
2	Q/BQB 130-2003
	St14

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!