S42010 - ASTM A493-2016

USA UNS	S42010
Corresponding Standard	ASTM A493-2016 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance Good Forgability

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo
Minimum Value	0.15	-	-	-	-	13.5	0.35	0.4
Maximum Value	0.3	1	1	0.04	0.03	15	0.85	0.85

Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa
Wires, rebar; d≥2.5	Annealing	≤690
Wires, rebar; d≥2.5	Light Drawing	≤725

Approximate Comparison Table Martensitic Heat-Resistant Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!