中文版
Home Material ASTM A511/A511M-2020
简体 | 繁體
USA UNS N08810
Corresponding Standard ASTM A511/A511M-2020
Seamless Stainless Steel Mechanical Tubing and Hollow Bar
Classification Austenitic Stainless Steel
Chemical Element Composition Content (%)
Component Fe ① C Si Mn P S Cr Ni Cu Ti Al
Minimum Value 39.5 0.05 - - - - 19 30 - 0.15 0.15
Maximum Value - 0.1 1 1.5 0.045 0.015 23 35 0.75 0.6 0.6
Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Annealing ≥450 ≥170 ≥30
1 Approximate Comparison Table Corrosion-Resistant Alloy
China United States Germany United Kingdom
GB ISC Commercial Grade UNS DIN EN/DIN W-Nr. BS EN/BS
NS 1102
(NS 112)
(1Cr20Ni32AlTi) 		H 08810
H 01102 		Incoloy 800H N 08810 X10NiCrAlTi 32-20 1.4876 NA 15
2 Approximate Comparison Table Austenitic Stainless Steel
Japan United States International Organization for Standardization European Standard
JIS UNS ISO Numerical Grade Numerical Grade
NCF800H N08810 X7NiCrAlTi33-21 4959-088-10-U 1.4959
3 Approximate Comparison Table Corrosion-Resistant Alloy
China United States Germany United Kingdom
GB Commercial Grade UNS DIN EN/DIN W-Nr. BS EN/BS
NS112 Incoloy 800H N08810 X5NiCrAlTi31-20 1.4958 NA15(H)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!