SNB5 - JIS G 4107-2007

Grade	SNB5
Corresponding Standard	JIS G 4107-2007 Alloy Steel Bolting Materials for High Temperature Service
Classification	Alloy Steel

SNB5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo
Minimum Value	-	-	-	-	-	4	0.4
Maximum Value	0.1	1	1	0.04	0.03	6	0.65

SNB5 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Bar, Wire rod, Bolt; d≤100	Normalizing + Tempering or Quenching + Tempering	≥690	≥550	≥16	≥50

Approximate Comparison Table Structural Alloy Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!