SNB16 - JIS G 4107-2007

Grade	SNB16
Corresponding Standard	JIS G 4107-2007 Alloy Steel Bolting Materials for High Temperature Service
Classification	Alloy Steel

SNB16 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V
Minimum Value	0.36	0.2	0.45	-	-	0.8	0.5	0.25
Maximum Value	0.44	0.35	0.7	0.04	0.04	1.15	0.65	0.35

SNB16 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Bar, Wire, Bolt; d≤63	Normalizing + Tempering or Quenching + Tempering	≥860	≥725	≥18	≥50
Bar, Wire, Bolt; 63<d≤100	Normalizing + Tempering or Quenching + Tempering	≥760	≥655	≥17	≥50
Bar, Wire, Bolt; 100<d≤120	Normalizing + Tempering or Quenching + Tempering	≥690	≥590	≥16	≥50

Approximate Comparison Table Structural Alloy Steel

SNB16 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!