SAPH 32 - JIS G 3113-1990

Grade	SAPH 32
Corresponding Standard	JIS G 3113-1990 Hot-rolled steel plates, sheet and strip for automobile structural uses
Classification	Other metal materials

SAPH 32 Chemical Element Composition Content (%)

Component	P	S
Minimum Value	-	-
Maximum Value	0.04	0.04

SAPH 32 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
1.6≤t＜2	≥314	≥186	≥33
2≤t＜2.5	≥314	≥186	≥34
2.5≤t＜3.15	≥314	≥226	≥36
3.15≤t＜4	≥314	≥186	≥38
4≤t＜6.3	≥314	≥186	≥40
6≤t＜8	≥314	≥186	① ≥26
8≤t＜14	≥314	≥177	≥26

New and Old Grade Replacement List

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	International Organization for Standardization	France	Russia
GB	JIS	ISO	NF EN/NF	GOST
Q195 (GB/T 700-2006)	SAPH32 (JIS G3113:2006)	Fe310-0 (ISO 630:1995) (ISO 1052:1982)	A33 (NF A35-501.1~6)	Ст1сп Ст1кп (GOST 380-2005)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!