NA 12 - BS 3076-1989

Grade	NA 12
Corresponding Standard	BS 3076-1989 Specification for Nickel and Nickel Alloys: Bar
Classification	Alloy Steel

NA 12 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Ni ^*	Cu	Ti	Co	Mg
Minimum Value	-	-	-	-	-	99	-	-	-	-
Maximum Value	0.4	0.02	0.35	0.35	0.01	-	0.25	0.1	2	0.2

NA 12 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Bar (Round, Square, Rectangular, and Hexagonal); All Sizes	Cold Work + Annealing	≥340	≥70	≥35
Bar (Round); All Sizes	Hot Work + Annealing	≥340	≥70	≥35

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!