中文版
Home Material DIN EN 10263-5-2018
简体 | 繁體
Grade X2CrNiMoN22-5-3
Germany W-Nr. 1.4462
Corresponding Standard DIN EN 10263-5-2018
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
Classification Duplex Stainless Steel
Properties Corrosion Resistance
Density 7.7 g/cm3
X2CrNiMoN22-5-3 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 21 4.5 2.5 0.1
Maximum Value 0.03 1 2 0.035 0.015 23 6.5 3.5 0.22
X2CrNiMoN22-5-3 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Reduction of Area
ψ
%
Bar, Rod, Wire; 2<d≤5 Solid Solution (+AT) or Solid Solution + Decap (+AT+PE) ≤880 ≥55
Rod, Wire; 2<d≤5 Solid Solution + Cold Drawing + Solid Solution (+AT+C+AT) ≤950 ≥55
Wire; 2<d≤5 Solid Solution + Cold Drawn + Solid Solution + Quenched Rolling (+AT+C+AT+LC) ≤1010 ≥50
Bar, rod, wire; 5<d≤10 Solid Solution (+AT) or Solid Solution + Decap (+AT+PE) ≤880 ≥55
Rod, Wire; 5<d≤10 Solid Solution + Cold Drawn (+AT+C) ≤1020 -
Rod, wire; 5<d≤10 Solid Solution + Cold Drawing + Solid Solution (+AT+C+AT) ≤900 ≥55
Wire; 5<d≤10 Solid Solution + Cold Drawn + Solid Solution + Quenched Rolling (+AT+C+AT+LC) ≤970 ≥50
Bar, rod, wire; 10<d≤25 Solid Solution (+AT) or Solid Solution + Decap (+AT+PE) ≤880 ≥55
Rod, Wire; 10<d≤25 Solid Solution + Cold Drawn (+AT+C) ≤1000 -
Rod, Wire; 10<d≤25 Solid Solution + Cold Drawing + Solid Solution (+AT+C+AT) ≤880 ≥55
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard
GB ISC CNS JIS KS UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade
022Cr22Ni5Mo3N
022Cr23Ni5Mo3N 		S22253
S22053 		329J3L SUS 329J3L STS 329J3L S31803
S32205 		X2CrNiMoN 22-5-3 4462-318-03-I X2CrNiMoN 22-5-3 1.4462 X2CrNiMoN 22-5-3 X2CrNiMoN 22-5-3 1.4462
2 Approximate Comparison Table
China United States Germany
GB Commercial Grade UNS W-Nr.
2205 F51 S31803 1.4462
X2CrNiMoN22-5-3 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMoN 22-5-3 1.4462
2 EN 10296-2-2005
X2CrNiMoN22-5-3 1.4462
3 EN 10253-4-2003
X2CrNiMoN22-5-3 1.4462
4 EN 10263-5-2001
X2CrNiMoN22-5-3 1.4462
5 EN 10250-4-1999
X2CrNiMoN 22-5-3 1.4462
6 ISO TS 15510-2003
X2CrNiMoN22-5-3
7 EN 10088-3-2005
X2CrNiMoN22-5-3 1.4462
8 ISO 9327(-5)-1999
X2CrNiMoN22-5-3
9 EN 10088-3-2014
X2CrNiMoN22-5-3 1.4462
10 ISO 15510-2014
X2CrNiMoN22-5-3 4462-318-03-I
11 DIN EN 10263-5-2018
X2CrNiMoN22-5-3 1.4462
12 ISO 9328-7-2018
X2CrNiMoN22-5-3
13 DIN EN 10088-3-2014
X2CrNiMoN22-5-3 1.4462
14 DIN EN 10270-3-2012
X2CrNiMoN22-5-3 1.4462
15 ISO 683-18-2014
X2CrNiMoN22-5-3 4462-318-03-I
16 ISO 4954-2018
X2CrNiMoN22-5-3 4462-318-03-I
17 NF EN 10088-2-2005
X2CrNiMoN22-5-3 1.4462
18 NF EN 10088-1-2005
X2CrNiMoN22-5-3 1.4462
19 NF EN 10028-7-2008
X2CrNiMoN22-5-3 1.4462
20 NF EN 10296-2-2005
X2CrNiMoN22-5-3 1.4462
21 NF EN 10028-7-2000
X2CrNiMoN22-5-3 1.4462
22 EN 10263-5-2017
X2CrNiMoN22-5-3 1.4462
23 ISO 4954-2-2024
X2CrNiMoN22-5-3 4462-318-03-I
24 DIN EN 10296-2-2006
X2CrNiMoN22-5-3 1.4462
25 EN 10272-2016
X2CrNiMoN22-5-3 1.4462

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!