中文版
Home Material DIN EN 10263-5-2018
简体 | 繁體
Grade X3CrNiCu18-9-4
Germany W-Nr. 1.4567
Corresponding Standard DIN EN 10263-5-2018
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
X3CrNiCu18-9-4 Chemical Element Composition Content (%)
Component C Si Mn P S ⓑ Cr Ni ⓒ Cu N
Minimum Value - - - - - 17 8.5 3 -
Maximum Value 0.04 1 2 0.045 0.03 19 10.5 4 0.1
X3CrNiCu18-9-4 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Reduction of Area
ψ
%
Rod, Wire; 2<d≤5 Solid Solution + Cold Drawing + Solid Solution (+AT+C+AT) ≤600 ≥68
Wire; 2<d≤5 Solid Solution + Cold Drawn + Solid Solution + Quenched Rolling (+AT+C+AT+LC) ≤650 ≥63
Bar, rod, wire; 5<d≤10 Solid Solution (+AT) or Solid Solution + Decap (+AT+PE) ≤590 ≥68
Rod, wire; 5<d≤10 Solid Solution + Cold Drawn (+AT+C) ≤740 -
Rod, Wire; 5<d≤10 Solid Solution + Cold Drawing + Solid Solution (+AT+C+AT) ≤590 ≥68
Wire; 5<d≤10 Solid Solution + Cold Drawn + Solid Solution + Quenched Rolling (+AT+C+AT+LC) ≤640 ≥63
Bar, rod, wire; 10<d≤25 Solid Solution (+AT) or Solid Solution + Decap (+AT+PE) ≤590 ≥68
Rod, wire; 10<d≤25 Solid Solution + Cold Drawn (+AT+C) ≤700 -
Rod, Wire; 10<d≤25 Solid Solution + Cold Drawing + Solid Solution (+AT+C+AT) ≤590 ≥68
Bar, rod, wire; 25<d≤50 Solid Solution (+AT) or Solid Solution + Decap (+AT+PE) ≤590 ≥68
Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard
GB ISC CNS JIS KS ASTM/AISI UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade
06Cr18Ni9Cu3 S30488 XM7 SUS XM7 STS XM7 XM7 S30430 X3CrNiCu 18-9-4 4567-304-30-I X3CrNiCu 18-9 1.4567 Z3CNU 18-10 X3CrNiCu 18-9-4 1.4567
X3CrNiCu18-9-4 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X3CrNiCu 18-9-4 1.4567
2 EN 10263-5-2001
X3CrNiCu18-9-4 1.4567
3 EN 10269-2006
X3CrNiCu18-9-4 1.4567
4 ISO TS 15510-2003
X3CrNiCu18-9-4
5 EN 10088-3-2005
X3CrNiCu18-9-4 1.4567
6 EN 10269-2013
X3CrNiCu 18-9-4 1.4567
7 EN 10088-3-2014
X3CrNiCu18-9-4 1.4567
8 ISO 15510-2014
X3CrNiCu18-9-4 4567-304-30-I
9 NF EN 10269-1999
X3CrNiCu18-9-4 1.4567
10 DIN EN 10263-5-2018
X3CrNiCu18-9-4 1.4567
11 DIN EN 10269-2014
X3CrNiCu 18-9-4 1.4567
12 DIN EN 10088-3-2014
X3CrNiCu18-9-4 1.4567
13 ISO 4954-2018
X3CrNiCu18-9-4 4567-304-30-I
14 NF EN 10088-1-2005
X3CrNiCu18-9-4 1.4567
15 EN 10263-5-2017
X3CrNiCu18-9-4 1.4567
16 ISO 4954-2-2024
X3CrNiCu18-9-4 4567-304-30-I

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!