C35 - ISO 683-1-2016

Grade	C35
Corresponding Standard	ISO 683-1-2016 Non-alloy steels for quenching and tempering
Classification	Carbon Steel

C35 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	More
Minimum Value	0.32	0.1	0.5	-	-	-	-	-	-	Cr+Mo+Ni≤0.63
Maximum Value	0.39	0.4	0.8	0.045	0.045	0.4	0.4	0.3	0.1	Cr+Mo+Ni≤0.63

C35 Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
d≤16 or t≤8	630~780	≥430	≥17	≥40
16＜d≤40 or 8＜t≤20	600~750	≥380	≥19	≥45
40＜d≤100 or 20＜t≤60	550~700	≥320	≥20	≥50

1 Approximate Comparison Table

China	Japan	International Organization for Standardization	European Standard
GB	JIS	ISO	EN	Numerical Grade
35	S35C	C35	C35	1.0501

2 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
35	S35C	1035 Gr.1035	C35 C35E4	C35	1.0501	AF55C35 C35	C35	1.0501	35 40	1550	070M36 40HS

3 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	France	Russia	United Kingdom
GB	JIS	ASTM/AISI	ISO	NF EN/NF	GOST	BS EN/BS
GB/T 699-1999 35	S35C	1035	ISO 630-1:1987 C35 C35E4 C35M2	C35 XC35	35	060A35

C35 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!