3J53 3J342T - YB /T 5256-2011

Grade	3J53
Other Names
Corresponding Standard	YB /T 5256-2011 3J1 and 3J53 Alloy for Elastic Component
Classification	Alloy Steel
Properties	Elasticity Corrosion Resistance
Density	8 g/cm³

3J53 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Ti	Al	More
Minimum Value	-	-	-	-	-	5.2	41.5	2.3	0.5	Fe:Remainder
Maximum Value	0.05	0.8	0.8	0.02	0.02	5.8	43	2.7	0.8	Fe:Remainder

Foreign brand/standard: 42НХТЮ/GOST 14117、GOST 14118

3J53 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
Cold Rolled Strip; 0.2≤d≤2.5	Aging	≥1225	≥5
Softened Strip; 0.2≤d≤1	Aging	≥1078	≥8
Cold Drawn Wire; 0.5≤d≤5	Aging	≥1372	≥5
Cold Drawn Bar; 3≤d≤18	Aging	≥1323	≥5
Hot Rolled (Forged) Round, Flat; 6≤d≤25	Aging	≥1078	≥10
Hot Rolled (Forged) Round, Flat Products; d>25	Aging	Measured	Measured
Cold-rolled strip; 0.5≤d≤2.5	Aging	≥882	-
Annealed Strip; 0.5≤d≤1	Aging	≥686	-

Approximate Comparison Table Elastic Alloy

3J53 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!