C35RC 1.1060 - DIN EN 10263-4-2018 - H2ABC

中文版

Grade	C35RC
Germany W-Nr.	1.1060
Corresponding Standard	DIN EN 10263-4-2018 Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion Part 4: Technical Delivery Conditions for Steels for Quenching and Tempering
Classification	Carbon Steel
Properties	Forgability

C35RC Chemical Element Composition Content (%)

Component	C ^ⓓ	Si ^ⓔ	Mn	P	S	Cu
Minimum Value	0.32	-	0.5	-	0.02	-
Maximum Value	0.39	0.3	0.8	0.025	0.035	0.25

C35RC Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Reduction of Area ψ %
Bars, wires; 2<d≤5	Untreated, Cold Drawn, Spheroidizing Treatment (+U+C+AC)	≤550	≥62
Bars, wires; 5<d≤40	Untreated, Cold Drawn, Spheroidizing Treatment (+U+C+AC)	≤540	≥62
Bars, wires; 2<d≤5	Untreated and Cold Drawn and Spheroidizing Treatment and Quenching Rolling (+U+C+AC+LC)	≤590	≥60
Bars, wires; 5<d≤40	Untreated and Cold Drawn and Spheroidizing Treatment and Quenching Rolling (+U+C+AC+LC)	≤580	≥60
Bar stock, rod stock; 5<d≤40	Spheroidizing or Spheroidizing + Rotary Peeling (+AC or +AC+PE)	≤560	≥60
Bar, Wire; 5＜d≤10	Spheroidizing Treatment and Cold Drawing (+AC+C)	≤670
Bar, Wire; 10<d≤40	Spheroidizing Treatment and Cold Drawing (+AC+C)	≤660

C35RC Corresponding Standards(Same grade name, different standards)

1	EN 10263-4-2001
	C35RC 1.1060
2	DIN EN 10263-4-2018
	C35RC 1.1060
3	EN 10263-4-2017
	C35RC 1.1060
4	ISO 4954-2018
	C35RC
5	ISO 4954-1-2024
	C35RC

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!