41CrS4 1.7039 - DIN EN 10263-4-2018

Grade	41CrS4
Germany W-Nr.	1.7039
Corresponding Standard	DIN EN 10263-4-2018 Steel rod, bars and wire for cold heading and cold extrusion Part 4: Technical delivery conditions for steels for quenching and tempering
Classification	Alloy Steel

41CrS4 Chemical Element Composition Content (%)

Component	C ^ⓓ	Si ^ⓔ	Mn	P	S	Cr	Cu
Minimum Value	0.38	-	0.6	-	0.02	0.9	-
Maximum Value	0.45	0.3	0.9	0.025	0.04	1.2	0.25

41CrS4 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Reduction of Area ψ %
Wire; 2<d≤5	Spheroidizing + Cold Drawn + Spheroidizing (+AC+C+AC)	≤610	≥60
Wire; 5<d≤40	Spheroidizing + Cold Drawn + Spheroidizing (+AC+C+AC)	≤600	≥60
Bars, wires; 2<d≤5	Spheroidizing + Cold Drawn + Spheroidizing + Quenched Rolling (+AC+C+AC+LC)	≤650	≥58
Bars, wires; 5<d≤40	Spheroidizing + Cold Drawn + Spheroidizing + Quenched Rolling (+AC+C+AC+LC)	≤640	≥58
Bars, rods, wires; 5<d≤40	Spheroidizing or Spheroidizing + Rotary Peeling (+AC or +AC+PE)	≤620	≥58

Approximate Comparison Table

International Organization for Standardization	Germany		France	European Standard		Russia	Sweden
ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS
41CrS4	41CrS4	1.7039	42C4u	41CrS4	1.7039	40KH	2245

41CrS4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!