HPb60-3 C37900 - GB /T 5231-2012

Grade	HPb60-3
China ISC	C37900
Corresponding Standard	GB /T 5231-2012 Designation and chemical composition of wrought copper and copper alloys
Classification	Copper and Copper Alloys

HPb60-3 Chemical Element Composition Content (%)

Component	Fe	Cu	Pb	Sn	Other Total ^*	More
Minimum Value	-	58	2.5	-	-	Zn:Remainder
Maximum Value	0.3	61	3.5	0.3	0.8	Zn:Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

• The mass fraction of iron in diamagnetic brass is not greater than 0.03%
* This value is the sum of the measured values of the impurity elements listed in the table.

Approximate Comparison Table Brass

China		Japan	United States		International Organization for Standardization		France	Russia	Australia
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	GOST	Australian Standard AS
HPb60-3	C37900	C3790 C37900	60Cu-37Zn-3Pb	C37900	CuZn37Pb3	C37900	CuZn37Pb3 C37900	ЛС60-3	379C C37900

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!