16 Mo 3 - ISO 9329-2-1997

Grade	16 Mo 3
Corresponding Standard	ISO 9329-2-1997 Unalloyed and Alloyed Steels with Specified Elevated Temperature Properties
Classification	Alloy Steel

16 Mo 3 Chemical Element Composition Content (%)

Component	C ^②	Si	Mn	P	S	Cu ^①	Mo	Al
Minimum Value	0.12	0.15	0.4	-	-	-	0.25	-
Maximum Value	0.2	0.35	0.8	0.035	0.035	0.25	0.35	0.02

16 Mo 3 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤40	Normalizing	450~600	≥270	Longitudinal ≥22, Transverse ≥20	t > 20 (horizontal 27, vertical 35)
40＜t≤60	Normalizing	450~600	≥260	Longitudinal ≥22, Transverse ≥20	Transverse 27, Longitudinal 35

Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
16Mo3	16Mo3	1.5415

16Mo3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!