HPb57-4 T38400 - GB /T 5231-2012

Grade	HPb57-4
China ISC	T38400
Corresponding Standard	GB /T 5231-2012 Designation and chemical composition of wrought copper and copper alloys
Classification	Copper and Copper Alloys

HPb57-4 Chemical Element Composition Content (%)

Component	Fe	Cu	Pb	Sn	Other Total ^*	More
Minimum Value	-	56	3.5	-	-	Zn: Remainder
Maximum Value	0.5	58	4.5	0.5	1.2	Zn: Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

• The mass fraction of iron in diamagnetic brass is not greater than 0.03%
* This value is the sum of the measured values of the impurity elements listed in the table.

Approximate Comparison Table Brass

China		United States	International Organization for Standardization	France	Russia
GB	ISC	ASTM	ISO	NF EN/NF	GOST
HPb57-4	T38400	57Cu-39Zn-4Pb	CuZn39Pb4	CuZn39Pb4	ЛС57-4

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!