37Mo2 1.5418 - EN 10263-4-2017

Grade	37Mo2
European Standard Steel Grade	1.5418
Corresponding Standard	EN 10263-4-2017 Steel Rod, Bars and Wire For Cold Heading and Cold Extrusion Part 4: Technical Delivery Conditions for Steels for Quenching and Tempering
Classification	Alloy Steel

37Mo2 Chemical Element Composition Content (%)

Component	C ^ⓓ	Si ^ⓔ	Mn	P	S	Cu	Mo
Minimum Value	0.35	-	0.6	-	-	-	0.2
Maximum Value	0.4	0.3	0.9	0.025	0.025	0.25	0.3

37Mo2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b ksi	Hardness HBW
Wire; 2<d≤5	Spheroidizing + Cold Drawn + Spheroidizing (+AC+C+AC)	≤560	≥61
Wire; 5<d≤40	Spheroidizing + Cold Drawn + Spheroidizing (+AC+C+AC)	≤550	≥61
Bars, wires; 2<d≤5	Spheroidizing + Cold Drawn + Spheroidizing + Quenched Rolling (+AC+C+AC+LC)	≤600	≥59
Bars, wires; 5<d≤40	Spheroidizing + Cold Drawn + Spheroidizing + Quenched Rolling (+AC+C+AC+LC)	≤590	≥59
Bars, rods, wires; 5<d≤40	Spheroidizing or Spheroidizing + Rotary Peeling (+AC or +AC+PE)	≤570	≥59

Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
37Mo2	37Mo2	1.5418

37Mo2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!