25CrMoS4 1.7213 - EN 10263-4-2017

Grade	25CrMoS4
European Standard Steel Grade	1.7213
Corresponding Standard	EN 10263-4-2017 Steel Rod, Bars and Wire For Cold Heading and Cold Extrusion Part 4: Technical Delivery Conditions for Steels for Quenching and Tempering
Classification	Alloy Steel

25CrMoS4 Chemical Element Composition Content (%)

Component	C ^ⓓ	Si ^ⓔ	Mn	P	S	Cr	Cu	Mo
Minimum Value	0.22	-	0.6	-	0.02	0.9	-	0.15
Maximum Value	0.29	0.3	0.9	0.025	0.04	1.2	0.25	0.3

25CrMoS4 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Reduction of Area ψ %
Wire; 2<d≤5	Spheroidizing + Cold Drawn + Spheroidizing (+AC+C+AC)	≤570	≥62
Wire; 5<d≤40	Spheroidizing + Cold Drawn + Spheroidizing (+AC+C+AC)	≤560	≥62
Bars, wires; 2<d≤5	Spheroidizing + Cold Drawn + Spheroidizing + Quenched Rolling (+AC+C+AC+LC)	≤610	≥60
Bars, wires; 5<d≤40	Spheroidizing + Cold Drawn + Spheroidizing + Quenched Rolling (+AC+C+AC+LC)	≤600	≥60
Bars, rods, wires; 5<d≤40	Spheroidizing or Spheroidizing + Rotary Peeling (+AC or +AC+PE)	≤580	≥60

1 Approximate Comparison Table Alloy Steel for Quenching and Tempering

International Organization for Standardization	Germany		France	European Standard
ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade
25CrMoS4	25CrMoS4	1.7213	25CD4u	25CrMoS4	1.7213

2 Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
25CrMoS4	25CrMoS4	1.7213

25CrMoS4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!