A7024 BE A 7N01 BE - JIS H 4040-2015

Grade	A7024 BE
Old Grade
Corresponding Standard	JIS H 4040-2015 Aluminium and aluminium alloy bars and wires
Classification	Aluminum and Aluminum Alloys
Properties	Corrosion Resistance Weldability

A7024 BE Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	V	Zr	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.2	-	-	-	-	-	4	1	-	-	Al:余量
Maximum Value	0.35	0.3	0.7	0.3	0.2	0.2	0.1	0.25	5	2	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

A7024 BE Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
All Sizes	7024 O	Annealing (O)	≥245	≥145	A50mm ≥12
All Sizes	7024 T4	Solution Heat Treatment + Natural Aging (T4)	≥315	≥195	≥11
All Sizes	7024 T5	High-Temperature Forming + Artificial Aging (T5)	≥325	≥245	≥10
All Sizes	7024 T6	Solution heat treatment + artificial aging hardening (T6)	≥335	≥275	≥10

① A50mm、A（5.65√S0）- gauge length，S0-Specimen area，s=S0，unit mm sq
② d-diameter、thickness or width across flats, unit mm；s - cross section area, unit mm sq

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!