C35 - DIN EN ISO 683-1-2018

Grade	C35
Corresponding Standard	DIN EN ISO 683-1-2018 Heat-treatable steels,alloy steels and free-cutting steels--Part 1: Non-alloy steels for quenching and tempering
Classification	Carbon Steel

C35 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	More
Minimum Value	0.32	0.1	0.5	-	-	-	-	-	-	Cr+Mo+Ni≤0.63
Maximum Value	0.39	0.4	0.8	0.045	0.045	0.4	0.4	0.3	0.1	Cr+Mo+Ni≤0.63

C35 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
d≤16; t≤8	Quenching and Tempering	630~780	≥430	≥17	≥40
16＜d≤40；8＜t≤20	Quenching and Tempering	600~750	≥380	≥19	≥45
40＜d≤100；20＜t≤60	Quenching and Tempering	550~700	≥320	≥20	≥50
d≤16；t≤16	Normalizing (N)	≥550	≥300	≥18
16<d≤100；16＜t≤100	Normalizing (N)	≥520	≥270	≥19
100<d≤250；100＜t≤250	Normalizing (N)	≥500	≥245	≥19

New and Old Grade Replacement List

1 Approximate Comparison Table

United States	International Organization for Standardization	Germany	France	European Standard		United Kingdom
ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	BS EN/BS
1035	C35R C35M2	C35 Cm35	XC38H1u	C35R	1.1180	080M36

2 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
35	S35C	1035 Gr.1035	C35 C35E4	C35	1.0501	AF55C35 C35	C35	1.0501	35 40	1550	070M36 40HS

3 Approximate Comparison Table

C35 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!