中文版
Home Material DIN EN 10025-2-2019
简体 | 繁體
Grade S460JR
Germany W-Nr. 1.0507
Corresponding Standard DIN EN 10025-2-2019
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification Carbon Steel
Density 7.85 g/cm3
S460JR Chemical Element Composition Content (%)
  Component C Si Mn P S Cu N Ti V Nb
d≤30 Minimum Value - - - - - - - - - -
Maximum Value 0.2 0.55 1.7 0.03 0.03 0.55 0.025 0.05 0.13 0.05
  Component C Si Mn P S Cu N Ti V Nb
d>30 Minimum Value - - - - - - - - - -
Maximum Value 0.22 0.55 1.7 0.03 0.03 0.55 0.025 0.05 0.13 0.05
S460JR Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
Long products; 3≤t≤16 550~720 ≥460 ≥17 20°C
≥27
Long products; 16<t≤40 550~720 ≥440 ≥17 ≥27
Long products; 40<t≤63 550~720 ≥420 ≥17 ≥27
Long products; 63<t≤80 550~720 ≥400 ≥17 ≥27
Long products; 80<t≤100 550~720 ≥390 ≥17 ≥27
Long products; 100<t≤150 530~700 ≥390 ≥17 ≥27
S460JR Corresponding Standards(Same grade name, different standards)
1 EN 10025-2-2019
S460JR 1.0507
2 DIN EN 10025-2-2019
S460JR 1.0507

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!