S460J0 1.0538 - DIN EN 10025-2-2019 - H2ABC

中文版

Grade	S460J0
Germany W-Nr.	1.0538
Corresponding Standard	DIN EN 10025-2-2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel
Density	7.85 g/cm³

S460J0 Chemical Element Composition Content (%)

	Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	Ti	V	Nb
d≤30	Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	-
d≤30	Maximum Value	0.2	0.55	1.7	0.03	0.03	0.29	0.42	0.55	0.11	0.025	0.05	0.13	0.05

	Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	Ti	V	Nb
d>30	Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	-
d>30	Maximum Value	0.22	0.55	1.7	0.03	0.03	0.29	0.42	0.55	0.11	0.025	0.05	0.13	0.05

S460J0 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Long products; 3≤t≤16	550~720	≥460	≥17	0°C ≥27
Long products; 16<t≤40	550~720	≥440	≥17	≥27
Long products; 40<t≤63	550~720	≥420	≥17	≥27
Long products; 63<t≤80	550~720	≥400	≥17	≥27
Long products; 80<t≤100	550~720	≥390	≥17	≥27
Long products; 100<t≤150	530~700	≥390	≥17	≥27

S460J0 Corresponding Standards(Same grade name, different standards)

1	EN 10025-2-2019
	S460J0 1.0538
2	DIN EN 10025-2-2019
	S460J0 1.0538

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!