中文版
Home Material DIN EN 10025-2-2019
简体 | 繁體
Grade S460J2
Germany W-Nr. 1.0552
Corresponding Standard DIN EN 10025-2-2019
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification Carbon Steel
Density 7.85 g/cm3
S460J2 Chemical Element Composition Content (%)
  Component C Si Mn P S Cr Ni Cu Mo N Ti V Nb
d≤30 Minimum Value - - - - - - - - - - - - -
Maximum Value 0.2 0.55 1.7 0.03 0.03 0.29 0.42 0.55 0.11 0.025 0.05 0.13 0.05
  Component C Si Mn P S Cr Ni Cu Mo N Ti V Nb
d>30 Minimum Value - - - - - - - - - - - - -
Maximum Value 0.22 0.55 1.7 0.03 0.03 0.29 0.42 0.55 0.11 0.025 0.05 0.13 0.05
S460J2 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
Long products; 3≤t≤16 550~720 ≥460 ≥17 -20°C
≥27
Long products; 16<t≤40 550~720 ≥440 ≥17 ≥27
Long products; 40<t≤63 550~720 ≥420 ≥17 ≥27
Long products; 63<t≤80 550~720 ≥400 ≥17 ≥27
Long products; 80<t≤100 550~720 ≥390 ≥17 ≥27
Long products; 100<t≤150 530~700 ≥390 ≥17 ≥27
S460J2 Corresponding Standards(Same grade name, different standards)
1 EN 10025-2-2019
S460J2 1.0552
2 DIN EN 10025-2-2019
S460J2 1.0552

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!