S235JRC 1.0122 - DIN EN 10025-2-2019

Grade	S235JRC
Germany W-Nr.	1.0122
Corresponding Standard	DIN EN 10025-2-2019 Hot Rolled Products of Structural Steels - Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels
Classification	Carbon Steel

S235JRC Chemical Element Composition Content (%)

	Component	C	Mn	P	S	Cr	Ni	Cu	Mo	N
t≤40	Minimum Value	-	-	-	-	-	-	-	-	-
t≤40	Maximum Value	0.17	1.4	0.035	0.035	0.29	0.42	0.55	0.11	0.012

	Component	C	Mn	P	S	Cr	Ni	Cu	Mo	N
t>40	Minimum Value	-	-	-	-	-	-	-	-	-
t>40	Maximum Value	0.2	1.4	0.035	0.035	0.29	0.42	0.55	0.11	0.012

S235JRC Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Long products and flat products; t≤1	360~510	≥235	≥17	20°C ≥27
Long and flat products; 1<t≤1.5	360~510	≥235	≥18	≥27
Long and flat products; 1.5<t≤2	360~510	≥235	≥19	≥27
Long and flat products; 2<t≤2.5	360~510	≥235	≥20	≥27
Long and flat products; 2.5<t<3	360~510	≥235	≥21	≥27
Long and flat products; 3≤t≤16	360~510	≥235	≥26	≥27
Long and flat products; 16<t≤40	360~510	≥225	≥26	≥27
Long and flat products; 40<t≤63	360~510	≥215	≥25	≥27
Long and flat products; 63<t≤80	360~510	≥215	≥24	≥27
Long and flat products; 80<t≤100	360~510	≥215	≥24	≥27
Long and flat products; 100<t≤150	350~500	≥195	≥22	≥27
Long and flat products; 150<t≤200	340~490	≥185	≥21	≥27
Long and flat products; 200<t≤250	340~490	≥175	≥21	≥27
Long products and flat products; 250<t≤400	330~480	≥165	≥21	≥27

S235JRC Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!