E360 1.0070 - EN 10025-2-2019

Grade	E360
European Standard Steel Grade	1.0070
Corresponding Standard	EN 10025-2-2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel
Density	7.85 g/cm³

E360 Chemical Element Composition Content (%)

Component	P	S	N
Minimum Value	-	-	-
Maximum Value	0.045	0.045	0.012

• FN= rimming steels not permitted; FF = fully killed steel

E360 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Long and flat products; 1<t≤1.5	690~900	≥360	≥5
Long and flat products; 1.5<t≤2	690~900	≥360	≥6
Long and flat products; 2<t≤2.5	690~900	≥360	≥7
Long and flat products; 2.5<t<3	690~900	≥360	≥8
Long and flat products; 3≤t≤16	670~830	≥360	≥11
Long and flat products; 16<t≤40	670~830	≥355	≥11
Long and flat products; 40<t≤63	670~830	≥345	≥10
Long and flat products; 63<t≤80	670~830	≥335	≥9
Long and flat products; 80<t≤100	670~830	≥325	≥9
Long and flat products; 100<t≤150	650~830	≥305	≥8
Long and flat products; 150<t≤200	640~830	≥295	≥7
Long and flat products; 200<t≤250	640~830	≥285	≥7
Long products and flat products; t≤1	690~900	≥360	≥4

Approximate Comparison Table

China	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
GB	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
Q390C	Fe690 FeE690	St70-2	1.0070	A70 A70-2	E360 Fe690-2①	1.0070	S375	1655-00 1655-01	E360

E360 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!