S235JRC 1.0122 - EN 10025-2-2019

Grade	S235JRC
European Standard Steel Grade	1.0122
Corresponding Standard	EN 10025-2-2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel

S235JRC Chemical Element Composition Content (%)

	Component	C	Mn	P	S	Cr	Ni	Cu	Mo	N
t≤40	Minimum Value	-	-	-	-	-	-	-	-	-
t≤40	Maximum Value	0.17	1.4	0.035	0.035	0.29	0.42	0.55	0.11	0.012

	Component	C	Mn	P	S	Cr	Ni	Cu	Mo	N
t>40	Minimum Value	-	-	-	-	-	-	-	-	-
t>40	Maximum Value	0.2	1.4	0.035	0.035	0.29	0.42	0.55	0.11	0.012

• FN= rimming steels not permitted; FF = fully killed steel

S235JRC Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Long products and flat products; t≤1	360~510	≥235	≥17	20°C ≥27
Long and flat products; 1<t≤1.5	360~510	≥235	≥18	≥27
Long and flat products; 1.5<t≤2	360~510	≥235	≥19	≥27
Long and flat products; 2<t≤2.5	360~510	≥235	≥20	≥27
Long and flat products; 2.5<t<3	360~510	≥235	≥21	≥27
Long and flat products; 3≤t≤16	360~510	≥235	≥26	≥27
Long and flat products; 16<t≤40	360~510	≥225	≥26	≥27
Long and flat products; 40<t≤63	360~510	≥215	≥25	≥27
Long and flat products; 63<t≤80	360~510	≥215	≥24	≥27
Long and flat products; 80<t≤100	360~510	≥215	≥24	≥27
Long and flat products; 100<t≤150	350~500	≥195	≥22	≥27
Long and flat products; 150<t≤200	340~490	≥185	≥21	≥27
Long and flat products; 200<t≤250	340~490	≥175	≥21	≥27
Long products and flat products; 250<t≤400	330~480	≥165	≥21	≥27

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	International Organization for Standardization	European Standard
GB	ISO	EN	Numerical Grade
Q235B	S235B	S235JRC	1.0122

S235JRC Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!