S500J0 1.0502 - EN 10025-2-2019

Grade	S500J0
European Standard Steel Grade	1.0502
Corresponding Standard	EN 10025-2-2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel
Density	7.85 g/cm³

S500J0 Chemical Element Composition Content (%)

	Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	Ti	V	Nb
d≤40	Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	-
d≤40	Maximum Value	0.2	0.55	1.7	0.03	0.03	0.29	0.42	0.55	0.11	0.025	0.05	0.13	0.05

	Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	Ti	V	Nb
d>40	Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	-
d>40	Maximum Value	0.22	0.55	1.7	0.03	0.03	0.29	0.42	0.55	0.11	0.025	0.05	0.13	0.05

• FN= rimming steels not permitted; FF = fully killed steel

S500J0 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Long products; 3≤t≤16	580~760	≥500	≥15	0°C ≥27
Long products; 16<t≤40	580~760	≥480	≥15	≥27
Long products; 40<t≤63	580~760	≥460	≥15	≥27
Long products; 63<t≤80	580~760	≥450	≥15	≥27
Long products; 80<t≤100	580~760	≥450	≥15	≥27
Long products; 100<t≤150	560~750	≥450	≥15	≥27

S500J0 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!