中文版
Home Material ISO 9328-7-2018
简体 | 繁體
Grade X3CrNiMo13-4
Corresponding Standard ISO 9328-7-2018
Steel Flat Products for Pressure Purposes - Technical Delivery Conditions - Stainless Steels
Classification Martensitic Stainless Steel
X3CrNiMo13-4 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - 0.5 - - 12 3.5 0.3 -
Maximum Value 0.05 0.7 1 0.04 0.015 14 4.5 1 0.02
X3CrNiMo13-4 Mechanical Properties
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
780~980 ≥650 ≥14
Approximate Comparison Table Martensitic Stainless Steel
China Japan United States International Organization for Standardization European Standard
GB ISC JIS UNS ISO EN Numerical Grade
04Cr13Ni5Mo S41595 SUS F6NM S41500 X3CrNiMo 13-4 X3CrNiMo 13-4 1.4313
X3CrNiMo13-4 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X3CrNiMo 13-4 1.4313
2 EN 10250-4-1999
X3CrNiMo 13-4 1.4313
3 ISO TS 15510-2003
X3CrNiMo13-4
4 EN 10088-3-2005
X3CrNiMo13-4 1.4313
5 EN 10088-3-2014
X3CrNiMo13-4 1.4313
6 ISO 15510-2014
X3CrNiMo13-4 4313-415-00-I
7 ISO 9328-7-2018
X3CrNiMo13-4
8 DIN EN 10088-3-2014
X3CrNiMo13-4 1.4313
9 NF EN 10088-2-2005
X3CrNiMo13-4 1.4313
10 NF EN 10088-1-2005
X3CrNiMo13-4 1.4313
11 NF EN 10028-7-2008
X3CrNiMo13-4 1.4313
12 NF EN 10028-7-2000
X3CrNiMo13-4 1.4313
13 EN 10272-2016
X3CrNiMo13-4 1.4313

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!