X1NiCrMoCu25-20-5 - ISO 9328-7-2018

Grade	X1NiCrMoCu25-20-5
Corresponding Standard	ISO 9328-7-2018 Steel flat products for pressure purposes - Technical delivery conditions - Stainless steels
Classification	Austenitic Stainless Steel

X1NiCrMoCu25-20-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	19	24	1.2	4	-
Maximum Value	0.02	0.7	2	0.03	0.01	21	26	2	5	0.15

X1NiCrMoCu25-20-5 Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤8, Cold Rolled Steel Strips	530~730	≥240	≥35	≥100
t≤13.5, Hot Rolled Steel Strips	530~730	≥220	≥35	≥100
t≤75, Hot rolled steel plates	520~720	≥220	≥40	≥100

Approximate Comparison Table Austenitic Stainless Steel

China		Japan	United States		International Organization for Standardization		France	European Standard		Sweden	United Kingdom
GB	ISC	JIS	ASTM/AISI	UNS	ISO	Numerical Grade	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS
015Cr21Ni26Mo5Cu2	S31782	SUS 890L	904L	N08904	X1NiCrMoCu25-20-5	4539-089-04-I	Z2NCDU25-20	X1NiCrMoCu25-20-5	1.4539	2562	904S13

X1NiCrMoCu25-20-5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!