X2CrNiN18-10 1.4311 - EN 10088-3-2014

Grade	X2CrNiN18-10
European Standard Steel Grade	1.4311
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel

X2CrNiN18-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^ⓑ	Cr	Ni	N
Minimum Value	-	-	-	-	-	17.5	8.5	0.12
Maximum Value	0.03	1	2	0.045	0.03	19.5	11.5	0.22

X2CrNiN18-10 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	550~760	≥270	(long.) ≥40	≤230	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	550~760	≥270	(tr.) ≥30	≤230	(tr.) ≥60

Approximate Comparison Table

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

European Standard

Sweden

United Kingdom

ISC

CNS

JIS

ASTM

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

Numerical Grade

BS EN/BS

022Cr19Ni10N
(00Cr18Ni10N)

S30453

304LN

SUS 304LN

STS 304LN

304LN

S30453

X2CrNiN 18-9
X2CrNiN18-10

X2CrNiN 18-10

1.4311

Z2CN 18-1Az
Z3CN18-10Az

X2CrNiN 18-10

1.4311

2371

304S62
304S61

X2CrNiN18-10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!