X2CrNiMoN 17-11-2 1.4406 - EN 10088-3-2014

Grade	X2CrNiMoN 17-11-2
European Standard Steel Grade	1.4406
Corresponding Standard	EN 10088-3-2014 Stainless Steels-Part 3: Technical Delivery Conditions for Semi-Finished Products, Bars, Rods, Wire, Sections and Bright Products of Corrosion Resisting Steels for General Purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X2CrNiMoN 17-11-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^ⓑ	Cr	Ni ^ⓓ	Mo	N
Minimum Value	-	-	-	-	-	16.5	10	2	0.12
Maximum Value	0.03	1	2	0.045	0.03	18.5	12.5	2.5	0.22

X2CrNiMoN 17-11-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	580~800	≥280	(long.) ≥40	≤250	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	580~800	≥280	(tr.) ≥30	≤250	(tr.) ≥60

Approximate Comparison Table Austenitic Stainless Steel

X2CrNiMoN17-11-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!