X5CrNi 17-7 1.4319 - EN 10088-3-2014

Grade	X5CrNi 17-7
European Standard Steel Grade	1.4319
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical Delivery Condition for Semi-Finished Products, Bars, Rods, Wire, Sections and Bright Products of Corrosion Resisting Steels for General Purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X5CrNi 17-7 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	-	-	-	16	6	-
Maximum Value	0.07	1	2	0.045	0.03	18	8	0.1

X5CrNi 17-7 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, Rod, Wire, Section, Bright Products; d≤16	+AT	500~700	≥190	(long.) ≥45	≤215	(long.) ≥100

X5CrNi17-7 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!