X9CrNi18-9 1.4325 - EN 10088-3-2014

Grade	X9CrNi18-9
European Standard Steel Grade	1.4325
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X9CrNi18-9 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	0.03	-	-	-	-	17	8
Maximum Value	0.15	1	2	0.045	0.03	19	10

X9CrNi18-9 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bars, rods, wire rods, profiles, bright products; d≤40	+AT	550~750	≥190	(long.) ≥40	≤215

Approximate Comparison Table

China	Japan	United States	International Organization for Standardization		European Standard
ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
S30210	SUS302	S30200	X9CrNi18-9	4325-302-00-E	1.4325

X9CrNi18-9 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!