X3CrNiCu 19-9-2 1.4560 - EN 10088-3-2014

Grade	X3CrNiCu 19-9-2
European Standard Steel Grade	1.4560
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X3CrNiCu 19-9-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	N
Minimum Value	-	-	1.5	-	-	18	8	1.5	-
Maximum Value	0.035	1	2	0.045	0.015	19	9	2	0.1

X3CrNiCu 19-9-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	450~650	≥170	(long.) ≥45	≤215	(long.) ≥100
Cold drawn, precision bar; d≤10	+AT	600~800		≥25
Cold drawn, precision bar; 10<d≤16	AT	600~800		≥25
Cold drawn, precision bar; 16<d≤40	AT	450~750		≥30
Cold drawn, precision bar; 40<d≤63	AT	450~750		≥30
Cold drawn, precision bar; 63<d≤160	AT	450~650		≥45

Approximate Comparison Table Stainless steels for cold heading and cold extruding

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
X3CrNiCu19-9-2	4560-304-75-E	X3CrNiCu19-9-2	1.4560

X3CrNiCu19-9-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!