中文版
Home Material EN 10088-3-2014
简体 | 繁體
Grade X6CrNiNb 18-10
European Standard Steel Grade 1.4550
Corresponding Standard EN 10088-3-2014
Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
X6CrNiNb 18-10 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni ⓓ More
Minimum Value - - - - - 17 9 Nb:10C~1.00
Maximum Value 0.08 1 2 0.045 0.015 19 12
X6CrNiNb 18-10 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW 		Impact Energy Absorption
KV2
J
Bar, rod, wire, section, bright products; d≤160 +AT 510~740 ≥205 (long.)
≥40		 ≤230 (long.)
≥100
Bar, rod, wire, section, bright products; 160<d≤250 +AT 510~740 ≥205 (tr.)
≥30		 ≤230 (tr.)
≥60
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM/AISI UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr18Ni11Nb S34778 347 SUS 347 STS 347 347 S34700 X6CrNiNb 18-10 X6CrNiNb 18-10
(X10CrNiNb18-9) 		1.4550 Z6CNNb 18-10 X6CrNiNb 18-10 1.4550 08Х18Н12Б 2338 347S17
347S31
2 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM/AISI UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr18Ni11Nb
(0Cr18Ni11Nb) 		S34778 347 SUS 347 STS 347 347 S34700 X6CrNiNb 18-10 X6CrNiNb 18-10
(X10CrNiNb18-9) 		1.4550 Z6CNNb 18-10 X6CrNiNb 18-10 1.4550 08Х18Н12Б 2338 347S17
347S31
3 Approximate Comparison Table
China International Organization for Standardization European Standard
GB ISO EN
0Cr18Ni10Nb X6CrNiNb18-10 X6CrNiNb18-10
X6CrNiNb18-10 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X6CrNiNb 18-10 1.4550
2 EN 10296-2-2005
X6CrNiNb18-10 1.4550
3 EN 10253-4-2003
X6CrNiNb18-10 1.4550
4 EN 10250-4-1999
X6CrNiNb 18-10 1.4550
5 ISO TS 15510-2003
X6CrNiNb18-10
6 EN 10088-2-2005
X6CrNiNb18-10 1.4550
7 DIN 17440-1972
X6CrNiNb 18-10 X10CrNiNb 18-9 1.4550
8 EN 10088-3-2005
X6CrNiNb 18-10 1.4550
9 ISO 9327(-5)-1999
X6CrNiNb18-10 (F50)
10 EN 10088-3-2014
X6CrNiNb 18-10 1.4550
11 ISO 15510-2014
X6CrNiNb18-10 4550-347-00-I
12 ISO 9328-7-2018
X6CrNiNb18-10
13 DIN EN 10088-3-2014
X6CrNiNb 18-10 1.4550
14 NF EN 10088-2-2005
X6CrNiNb18-10 1.4550
15 NF EN 10088-1-2005
X6CrNiNb18-10 1.4550
16 NF EN 10028-7-2008
X6CrNiNb18-10 1.4550
17 NF EN 10296-2-2005
X6CrNiNb18-10 1.4550
18 NF EN 10028-7-2000
X6CrNiNb18-10 1.4550
19 DIN EN 10296-2-2006
X6CrNiNb18-10 1.4550

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!