X8CrMnCuN 17-8-3 1.4597 - EN 10088-3-2014

Grade	X8CrMnCuN 17-8-3
European Standard Steel Grade	1.4597
Corresponding Standard	EN 10088-3-2014 Stainless Steels-Part 3: Technical Delivery Conditions for Semi-Finished Products, Bars, Rods, Wire, Sections and Bright Products of Corrosion Resisting Steels for General Purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X8CrMnCuN 17-8-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	6.5	-	-	15	-	2	-	0.1
Maximum Value	0.1	2	9	0.04	0.03	18	3	3.5	1	0.3

X8CrMnCuN 17-8-3 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	560~780	≥270	(long.) ≥40	≤245	(long.) ≥100
Cold drawn wire; d≥0.05	+C500	500~700
Cold drawn wire; d≥0.05	+C600	600~800
Cold drawn wire; d≥0.05	+C700	700~900
Cold drawn wire; d≥0.05	+C800	800~1000
Cold drawn wire; d≥0.05	+C900	900~1100
Cold drawn wire; d≥0.05	+C1000	1000~1250
Cold drawn wire; d≥0.05	+C1100	1100~1350
Cold drawn wire; d≥0.05	+C1200	1200~1450
Cold drawn wire; d≥0.05	+C1400	1400~1700
Cold drawn wire; d≥0.05	+C1600	1600~1900
Cold drawn wire; d≥0.05	+C1800	1800~2100
Cold drawn wire; 0.05<d≤0.1	+AT	≤1100		≥20
Cold drawn wire; 0.1<d≤0.2	+AT	≤1050		≥20
Cold drawn wire; 0.2<d≤0.5	+AT	≤1000		≥30
Cold drawn wire; 0.5<d≤1	+AT	≤950		≥30
Cold drawn wire; 1<d≤3	+AT	≤900		≥30
Cold drawn wire; 3<d≤5	+AT	≤850		≥35
Cold-drawn wire; 5<d≤16	+AT	≤800		≥35

X8CrMnCuN17-8-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!