X11CrNiMnN 19-8-6 1.4369 - EN 10088-3-2014

Grade	X11CrNiMnN 19-8-6
European Standard Steel Grade	1.4369
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X11CrNiMnN 19-8-6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	0.07	0.5	5	-	-	17.5	6.5	0.2
Maximum Value	0.15	1	7.5	0.03	0.015	19.5	8.5	0.3

X11CrNiMnN 19-8-6 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar stock, rod stock, wire, profiles, bright products; d ≤ 15	+AT	750~950	≥340	(long.) ≥35	≤300	(long.) ≥100
Bar stock, rod stock, wire, profiles, bright products; d ≤ 15	+AT	750~950	≥340	(tr.) ≥35	≤300	(tr.) ≥60

Approximate Comparison Table

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X11CrNiMnN19-8-6	4369-202-91-I	1.4369

X11CrNiMnN19-8-6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!