X2CrNiMoCuS17-10-2 1.4598 - EN 10088-3-2014

Grade	X2CrNiMoCuS17-10-2
European Standard Steel Grade	1.4598
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X2CrNiMoCuS17-10-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	0.1	16.5	10	1.3	2	-
Maximum Value	0.03	1	2	0.045	0.2	18.5	13	1.8	2.5	0.1

X2CrNiMoCuS17-10-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	500~700	≥200	(long.) ≥40	≤215	(long.) ≥100
Cold drawn, precision bar; d≤10	+AT	600~930	≥400	≥15
Cold drawn, precision bar; 10<d≤16	+AT	600~900	≥400	≥20
Cold drawn, precision bar; 16<d≤40	+AT	500~850	≥200	≥25
Cold drawn, precision bar; 40<d≤63	+AT	500~800	≥200	≥30
Cold drawn, precision bar; 63<d≤160	+AT	500~700	≥200	≥40

X2CrNiMoCuS17-10-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!