X6CrNiMoNb 17-12-2 1.4580 - EN 10088-3-2014

Grade	X6CrNiMoNb 17-12-2
European Standard Steel Grade	1.4580
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X6CrNiMoNb 17-12-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	More
Minimum Value	-	-	-	-	-	16.5	10.5	2	Nb：10xC~1.00
Maximum Value	0.08	1	2	0.045	0.015	18.5	13.5	2.5	Nb：10xC~1.00

X6CrNiMoNb 17-12-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	510~740	≥215	(long.) ≥35	≤230	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	510~740	≥215	(tr.) ≥30	≤230	(tr.) ≥60

Approximate Comparison Table

China	United States		International Organization for Standardization		European Standard
ISC	ASTM	UNS	ISO	Numerical Grade	EN	Numerical Grade
S31678	316Nb (316Cb)	S31640	X6CrNiMoNb17-12-2	4580-316-40-I	X6CrNiMoNb17-12-2	1.4580

X6CrNiMoNb17-12-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!