Grade X1CrNiMoCuN 20-18-7
European Standard Steel Grade 1.4547
Corresponding Standard EN 10088-3-2014
Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
Density 8 g/cm3
X1CrNiMoCuN 20-18-7 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu Mo N
Minimum Value - - - - - 19.5 17.5 0.5 6 0.18
Maximum Value 0.02 0.7 1 0.03 0.01 20.5 18.5 1 7 0.25
X1CrNiMoCuN 20-18-7 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Impact Energy Absorption
KV2
J
Bar, rod, wire, section, bright products; d≤160 +AT 650~850 ≥300 (long.)
≥35
≤260 (long.)
≥100
Bar, rod, wire, section, bright products; 160<d≤250 +AT 650~850 ≥300 (tr.)
≥30
≤260 (tr.)
≥60
Cold drawn wire; d≥0.05 +C500 500~700
Cold drawn wire; d≥0.05 +C600 600~800
Cold drawn wire; d≥0.05 +C700 700~900
Cold drawn wire; d≥0.05 +C800 800~1000
Cold drawn wire; d≥0.05 +C900 900~1100
Cold drawn wire; d≥0.05 +C1000 1000~1250
Cold drawn wire; d≥0.05 +C1100 1100~1350
Cold drawn wire; d≥0.05 +C1200 1200~1450
Cold drawn wire; d≥0.05 +C1400 1400~1700
Cold drawn wire; d≥0.05 +C1600 1600~1900
Cold drawn wire; d≥0.05 +C1800 1800~2100
Cold drawn wire; 0.05<d≤0.1 +AT ≤1100 (long.)
≥20
Cold drawn wire; 0.1<d≤0.2 +AT ≤1050 ≥20
Cold drawn wire; 0.2<d≤0.5 +AT ≤1000 ≥30
Cold drawn wire; 0.5<d≤1 +AT ≤950 ≥30
Cold drawn wire; 1<d≤3 +AT ≤900 ≥30
Cold drawn wire; 3<d≤5 +AT ≤850 ≥35
Cold-drawn wire; 5<d≤16 +AT ≤800 ≥35
1 Approximate Comparison Table
China Japan United States International Organization for Standardization European Standard Sweden
GB ISC JIS ASTM UNS ISO EN Numerical Grade SS
015Cr20Ni18Mo6CuN S31252 SUS 312L S31254 S31254 X1CrNiMoN 20-18-7
X1CrNiMoCuN20-18-7
X1CrNiMoCuN 20-18-7 1.4547 254SMO
2 Approximate Comparison Table
China United States Germany European Standard Sweden
GB Commercial Grade UNS DIN EN/DIN W-Nr. EN Numerical Grade SS
254SMo 254SMO S31254 X1CrNiMoCuN20-18-7 1.4547 X1CrNiMoCuN20-18-7 1.4547 2378

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!