X1CrNiMoCuNW 24-22-6 1.4659 - EN 10088-3-2014

Grade	X1CrNiMoCuNW 24-22-6
European Standard Steel Grade	1.4659
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8.2 g/cm³

X1CrNiMoCuNW 24-22-6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^ⓒ	Mo	N	W
Minimum Value	-	-	2	-	-	23	21	1	5.5	0.35	1.5
Maximum Value	0.02	0.7	4	0.03	0.01	25	23	2	6.5	0.5	2.5

X1CrNiMoCuNW 24-22-6 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	800~1000	≥420	(long.) ≥50	≤290	(long.) ≥90

Approximate Comparison Table

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	Numerical Grade
S31266	X1CrNiMoCuNW24-22-6	4659-312-66-I	1.4659

X1CrNiMoCuNW24-22-6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!