X1CrNiMoCuN 25-25-5 1.4537 - EN 10088-3-2014

Grade	X1CrNiMoCuN 25-25-5
European Standard Steel Grade	1.4537
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8.1 g/cm³

X1CrNiMoCuN 25-25-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	24	24	1	4.7	0.17
Maximum Value	0.02	0.7	2	0.03	0.01	26	27	2	5.7	0.25

X1CrNiMoCuN 25-25-5 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	600~800	≥300	(long.) ≥35	≤250	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	600~800	≥300	(tr.) ≥30	≤250	(tr.) ≥60

Approximate Comparison Table Austenitic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	EN	Numerical Grade
N08932	X1CrNiMoCuN25-25-5	4537-310-92-E	X1CrNiMoCuN25-25-5	1.4537

X1CrNiMoCuN25-25-5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!