X2CrNiN23-4 1.4362 - EN 10088-3-2014

Grade	X2CrNiN23-4
European Standard Steel Grade	1.4362
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Duplex Stainless Steel
Properties	Corrosion Resistance

X2CrNiN23-4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	22	3.5	0.1	0.1	0.05
Maximum Value	0.03	1	2	0.035	0.015	24.5	5.5	0.6	0.6	0.2

X2CrNiN23-4 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	600~830	≥400	(long.) ≥25	≤260	(long.) ≥100
Cold drawn wire; d≥0.05	+C800	800~1000
Cold drawn wire; d≥0.05	+C900	900~1100
Cold drawn wire; d≥0.05	+C1000	1000~1250
Cold drawn wire; d≥0.05	+C1100	1100~1350
Cold drawn wire; d≥0.05	+C1200	1200~1450
Cold drawn wire; d≥0.05	+C1400	1400~1700
Cold drawn wire; d≥0.05	+C1600	1600~1900
Cold drawn wire; d≥0.05	+C1800	1800~2100
Cold drawn wire; 0.5<d≤1	+AT	≤1050		≥20
Cold drawn wire; 1<d≤3	+AT	≤1000		≥20
Cold drawn wire; 3<d≤5	+AT	≤950		≥25
Cold-drawn wire; 5<d≤16	+AT	≤900		≥25

1 Approximate Comparison Table Austenitic-Ferritic Stainless Steel

China		United States		International Organization for Standardization	European Standard
GB	ISC	ASTM	UNS	ISO	EN	Numerical Grade
022Cr23Ni4MoCuN	S23043	2304	S32304	X2CrNiN 23-4	X2CrNiN 23-4	1.4362

2 Approximate Comparison Table Austenitic-Ferritic Stainless Steel

X2CrNiN23-4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!