中文版
Home Material EN 10088-3-2014
简体 | 繁體
Grade X2CrNiMoN22-5-3
European Standard Steel Grade 1.4462
Corresponding Standard EN 10088-3-2014
Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification Duplex Stainless Steel
Properties Corrosion Resistance
X2CrNiMoN22-5-3 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 21 4.5 2.5 0.1
Maximum Value 0.03 1 2 0.035 0.015 23 6.5 3.5 0.22
X2CrNiMoN22-5-3 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW 		Impact Energy Absorption
KV2
J
Bar, rod, wire, section, bright products; d≤160 +AT 650~880 ≥450 (long.)
≥25		 ≤270 (long.)
≥100
Cold drawn, precision bar; d≤10 +AT 850~1150 ≥650 ≥12
Cold drawn, precision bar; 10<d≤16 +AT 850~1100 ≥650 ≥12
Cold drawn, precision bar; 16<d≤40 +AT 650~1000 ≥450 ≥15 ≥100
Cold drawn, precision bar; 40<d≤63 +AT 650~1000 ≥450 ≥15 ≥100
Cold drawn, precision bar; 63<d≤160 +AT 650~880 ≥450 ≥25 ≥100
Cold drawn wire; d≥0.05 +C800 800~1000
Cold drawn wire; d≥0.05 +C900 900~1100
Cold drawn wire; d≥0.05 +C1000 1000~1250
Cold drawn wire; d≥0.05 +C1100 1100~1350
Cold drawn wire; d≥0.05 +C1200 1200~1450
Cold drawn wire; d≥0.05 +C1400 1400~1700
Cold drawn wire; d≥0.05 +C1600 1600~1900
Cold drawn wire; d≥0.05 +C1800 1800~2100
Cold drawn wire; 0.5<d≤1 +AT ≤1050 ≥20
Cold drawn wire; 1<d≤3 +AT ≤1000 ≥20
Cold drawn wire; 3<d≤5 +AT ≤9500 ≥25
Cold-drawn wire; 5<d≤16 +AT ≤900 ≥25
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard
GB ISC CNS JIS KS UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade
022Cr22Ni5Mo3N
022Cr23Ni5Mo3N 		S22253
S22053 		329J3L SUS 329J3L STS 329J3L S31803
S32205 		X2CrNiMoN 22-5-3 4462-318-03-I X2CrNiMoN 22-5-3 1.4462 X2CrNiMoN 22-5-3 X2CrNiMoN 22-5-3 1.4462
2 Approximate Comparison Table
United States France European Standard Sweden United Kingdom
UNS NF EN/NF EN Numerical Grade SS BS EN/BS
S32205 Z3CND22-05Az X2CrNiMoN22-5-3 1.4462 2377 318S13
3 Approximate Comparison Table Stainless steels for cold heading and cold extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
022Cr23Ni5Mo3N S22053 SUS329J3L 2205 S32205 X2CrNiMoN22-5-3 4462-318-03-I X2CrNiMoN22-5-3 1.4462
X2CrNiMoN22-5-3 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMoN 22-5-3 1.4462
2 EN 10296-2-2005
X2CrNiMoN22-5-3 1.4462
3 EN 10253-4-2003
X2CrNiMoN22-5-3 1.4462
4 EN 10263-5-2001
X2CrNiMoN22-5-3 1.4462
5 EN 10250-4-1999
X2CrNiMoN 22-5-3 1.4462
6 ISO TS 15510-2003
X2CrNiMoN22-5-3
7 EN 10088-3-2005
X2CrNiMoN22-5-3 1.4462
8 ISO 9327(-5)-1999
X2CrNiMoN22-5-3
9 EN 10088-3-2014
X2CrNiMoN22-5-3 1.4462
10 ISO 15510-2014
X2CrNiMoN22-5-3 4462-318-03-I
11 DIN EN 10263-5-2018
X2CrNiMoN22-5-3 1.4462
12 ISO 9328-7-2018
X2CrNiMoN22-5-3
13 DIN EN 10088-3-2014
X2CrNiMoN22-5-3 1.4462
14 DIN EN 10270-3-2012
X2CrNiMoN22-5-3 1.4462
15 ISO 683-18-2014
X2CrNiMoN22-5-3 4462-318-03-I
16 ISO 4954-2018
X2CrNiMoN22-5-3 4462-318-03-I
17 NF EN 10088-2-2005
X2CrNiMoN22-5-3 1.4462
18 NF EN 10088-1-2005
X2CrNiMoN22-5-3 1.4462
19 NF EN 10028-7-2008
X2CrNiMoN22-5-3 1.4462
20 NF EN 10296-2-2005
X2CrNiMoN22-5-3 1.4462
21 NF EN 10028-7-2000
X2CrNiMoN22-5-3 1.4462
22 EN 10263-5-2017
X2CrNiMoN22-5-3 1.4462
23 ISO 4954-2-2024
X2CrNiMoN22-5-3 4462-318-03-I
24 DIN EN 10296-2-2006
X2CrNiMoN22-5-3 1.4462
25 EN 10272-2016
X2CrNiMoN22-5-3 1.4462

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!