X3CrNiMoN 27-5-2 1.4460 - EN 10088-3-2014

Grade	X3CrNiMoN 27-5-2
European Standard Steel Grade	1.4460
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Duplex Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X3CrNiMoN 27-5-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^ⓑ	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	25	4.5	1.3	0.05
Maximum Value	0.05	1	2	0.035	0.03	28	6.5	2	0.2

X3CrNiMoN 27-5-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	620~880	≥450	(long.) ≥20	≤260	(long.) ≥85
Cold drawn, precision bar; d≤10	+AT	770~1030	≥610	≥12
Cold drawn, precision bar; 10<d≤16	+AT	770~1030	≥560	≥12
Cold drawn, precision bar; 16<d≤40	+AT	620~950	≥460	≥15		≥85
Cold drawn, precision bar; 40<d≤63	+AT	620~950	≥460	≥15		≥85
Cold drawn, precision bar; 63<d≤160	+AT	620~880	≥460	≥20		≥85

Approximate Comparison Table

China		United States	International Organization for Standardization		Germany		France	European Standard
GB	ISC	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade
022Cr25Ni6Mo2N	S22553	S31200	X3CrNiMoN 27-5-2	4460-312-00-I	X3CrNiMoN 27-5-2	1.4460	X3CrNiMoN 27-5-2	X3CrNiMoN 27-5-2	1.4460

X3CrNiMoN27-5-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!