X2CrNiN22-2 1.4062 - EN 10088-3-2014

Grade	X2CrNiN22-2
European Standard Steel Grade	1.4062
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Duplex Stainless Steel
Properties	Corrosion Resistance

X2CrNiN22-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	21.5	1	-	0.16
Maximum Value	0.03	1	2	0.04	0.01	24	2.9	0.45	0.28

X2CrNiN22-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	650~900	≥380	(long.) ≥30	≤290	(long.) ≥40
Cold Drawn, Precision Finished Bar; d≤16	+AT	650~1100	≥600	≥15
Cold drawn, precision bar; 16<d≤40	+AT	700~1100	≥500	≥15
Cold Drawn, Precision Finished Bar; d>40	+AT	700~1100	≥500	≥20
Cold drawn wire; d≥0.05	+C800	800~1000
Cold drawn wire; d≥0.05	+C900	900~1100
Cold drawn wire; d≥0.05	+C1000	1000~1250
Cold drawn wire; d≥0.05	+C1100	1100~1350
Cold drawn wire; d≥0.05	+C1200	1200~1450
Cold drawn wire; d≥0.05	+C1400	1400~1700
Cold drawn wire; d≥0.05	+C1600	1600~1900
Cold drawn wire; d≥0.05	+C1800	1800~2100		≥20
Cold drawn wire; 0.5<d≤1	+AT	≤1050		≥20
Cold drawn wire; 1<d≤3	+AT	≤1000		≥25
Cold drawn wire; 3<d≤5	+AT	≤950		≥25
Cold-drawn wire; 5<d≤16	+AT	≤900

Approximate Comparison Table Austenitic-Ferritic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	EN	Numerical Grade
S32202	X2CrNiN22-2	4062-322-02-U	X2CrNiN22-2	1.4062

X2CrNiN22-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!