X2CrCuNiN23–2-2 1.4669 - EN 10088-3-2014

Grade	X2CrCuNiN23–2-2
European Standard Steel Grade	1.4669
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Duplex Stainless Steel
Properties	Corrosion Resistance

X2CrCuNiN23–2-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	1	-	-	21.5	1	1.6	-	0.12
Maximum Value	0.045	1	3	0.04	0.03	24	3	3	0.5	0.2

X2CrCuNiN23–2-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	650~900	≥400	(long.) ≥25	≤300	(long.) ≥100

Approximate Comparison Table Austenitic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X2CrCuNiN23-2-2	4669-322-76-E	1.4669

X2CrCuNiN23–2-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!