X2CrNiMoSi 18-5-3 1.4424 - EN 10088-3-2014

Grade	X2CrNiMoSi 18-5-3
European Standard Steel Grade	1.4424
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Duplex Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X2CrNiMoSi 18-5-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	1.4	1.2	-	-	18	4.5	2.5	0.05
Maximum Value	0.03	2	2	0.035	0.015	19	5.2	3	0.1

X2CrNiMoSi 18-5-3 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤50	+AT	700~900	≥150	(long.) ≥25	≤260	(long.) ≥100
Bar, Rod, Wire, Section, Bright Products; 50<d≤160	+AT	680~900	≥400	≥25	≤260	≥100

Approximate Comparison Table Austenitic-Ferritic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	Numerical Grade
S31500	X2CrNiMoSiMnN19-5-3-2-2	4424-315-00-I	1.4424

X2CrNiMoSi18-5-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!