X2CrTi 17 1.4520 - EN 10088-3-2014

Grade	X2CrTi 17
European Standard Steel Grade	1.4520
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X2CrTi 17 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	N	More
Minimum Value	-	-	-	-	-	16	-	Ti:[4x(C+N) + 0.15] ~0.80*
Maximum Value	0.025	0.5	0.5	0.04	0.015	18	0.015	Ti:[4x(C+N) + 0.15] ~0.80*

X2CrTi 17 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar, rod, wire, section, bright products; d≤50	+A	420~620	≥200	≥20	≤200
Cold drawn, precision bar; d≤10	+A	500~750	≥320	≥8
Cold drawn, precision bar; 10<d≤16	+A	480~750	≥300	≥10
Cold drawn, precision bar; 16<d≤40	+A	400~700	≥240	≥15
Cold Drawn, Precision Finished Bar; 40<d≤50	+A	400~700	≥240	≥15

1 Approximate Comparison Table

Japan	International Organization for Standardization		European Standard
JIS	ISO	Numerical Grade	Numerical Grade
SUS430LX	X2CrTi17	4520-430-70-I	1.4520

2 Approximate Comparison Table

China		Japan	International Organization for Standardization		European Standard		Russia
GB	ISC	JIS	ISO	Numerical Grade	EN	Numerical Grade	GOST
022Cr17NbTi (00Cr17) (022Cr18Ti) GB/T 20878-2024	S11763 (S11863)	SUS430LX	X2CrTi17 ISO 15510	4520-430-70-Ⅰ	X2CrTi17 EN 10088-1	1.4520	08Х17Т GOST 5632

X2CrTi17 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!